docker run hello-world

Virtualization is the latest Trend and it’s happening everywhere. We started with virtualising hardware and soon realised its over-kill. Realisation is the starting of change. It resulted in a light weight version of virtualization: Linux-Containers or LXC . They are getting adopted Industry wide.

LXC is the solution but what is the tool!!!

One of the most accepted tool is Docker

LXC makes use of the kernel functionalities of cgroup and kernel-namespace. It virtualises at the operating system level and makes it less costlier than its predecessor.

So let’s try setting-up docker and run hello-world, our very old custom..

fyi: Docker makes use of virtualbox. For OSX you may download the package (.pkg) from boot2docker/osx-installer and double-clicking it installs both virtualbox and docker. For other OS/platforms, you may follow instructions from docker-installation-guide.

Once the installation is complete, use splotligt (⌘-Space bar) to open boot2docker.

It opens terminal and runs the initialisation steps and generates encryption keys.

Screen Shot 2015-07-15 at 10.21.51 pm

The terminal is left to you after that.

Lets spin up the VM now.

boot2docker start

Display the docker environment variables to see if the certificate path are set right.

boot2docker shellinit

`To set the environment variables displayed with the above command, run the above command with ‘eval’

eval "$(boot2docker shellinit)" 
or 
$(boot2docker shellinit)

We are ready for the final run..

boot2docker run hello-world

You should now be seeing the output of hello-world.

Screen Shot 2015-07-15 at 10.45.51 pm

 

If things didn’t go well and you want to start again deleting the current vm, run the below set of commands in order.

boot2docker delete
boot2docker init
boot2docker start
$(boot2docker shellinit)
boot2docker run hello-world

Python CGI in Apache httpd server

Pre-requisite: Working Apache Server.

 

In httpd-vhosts.conf:

Add below content inside <VirtualHost …>

ScriptAlias /cgi-bin/ "/cgi-bin/" 
<directory "<httpd-installed-path="">/cgi-bin/">
         Options Indexes FollowSymLinks ExecCGI
         AddHandler cgi-script .cgi .py
         AllowOverride None
         Require all granted 

Now create a new file ‘test.py’ in /cgi-bin/  with content:

#!/usr/bin/env python

import cgi
cgi.test()

Make sure the below line is not commented in httpd.conf

LoadModule cgi_module modules/mod_cgi.so

Start/Restart apache server.

You can verify the loaded cgi module using the command:

sudo [path/]apachectl -M | grep cgi

Try below url in web-browser:

http://<ip/hostname>:/cgi-bin/test.py

eg:
http://localhost:1025/cgi-bin/test.py
http://localhost:80/cgi-bin/test.py

You will get a page with details on current working directory, command line arguments, etc..

Configure VMs which talk to each other.

Hi,

This blog will walk you through setting up three different fedora VMs : ram, daisy and rincy; who will be talking to each other and also with the host machine; very soon…

Pre-requirements:

  • 3VMs already setup inVirtualBox.
    • See mine below. Name doesn’t matter much. You may use your own. My VMs run fedora OS. Depending on your OS, you may have to Google a little more on how to set different configurations. I am sure, Google will be happy to help you.

Screen Shot 2015-03-15 at 9.29.44 pm

 

A little help with my vocabulary:

host machine : machine which runs VirtualBox
VM           : Virtual Machine

First we need a Host-Only Adapter. This needs to be created in the Virtual Box and not in any particular VMs. So lets do that first.

Go to the preference of VirtualBox. Mine is a Mac. Don’t confuse with the screenshots if you are using another host OS.

Screen Shot 2015-03-15 at 8.49.51 pmGo to the “Network” tab and choose “Host-only Networks” sub-tab and create a new Adapter by clicking on the green plus sign you see on the right side of the window. There comes the new adapter “vboxnet0”

Screen Shot 2015-03-15 at 8.50.23 pm

Double-click “vboxnet0” or click on the screw-driver icon on the right side of the window after highlighting “vboxnet0”  to see it’s settings. Below are the default values and we are fine with it unless you really want to change it. You can see the “Lower Address Bound and “Upper Address Bound”. We can choose IP from this range for our machines.

Screen Shot 2015-03-15 at 8.51.04 pm

Press “OK” if you made some change else “OK” or “Cancel” as you like and we have a working “Host-only Adapter” now.

Now we should connect it to all three VMs.

Highlight a VM and click “Settings” (on the top of the window between “New” and “Show”)

Screen Shot 2015-03-15 at 8.51.41 pm

Select the “Network” tab from the window which appeared. Leave “Adapter 1” as we need it to be Attached to “NAT” for accessing internet via host machine. Select “Adapter 2” and select “Host-only Adapter” option from the drop down menu of “Attached to:”. Ofcourse the value for “Name:” is our newly created “vboxnet0”.

Screen Shot 2015-03-15 at 8.52.14 pm

Set “Promiscuous Mode:” to “Allow All” or “Allow VMs”. Putting it to “Deny” will stop any communication via this Adapter. Hope you too don’t want that as our intention is otherwise.

Screen Shot 2015-03-15 at 8.52.39 pm

Now we need to boot into the VMs and assign a static-IP for each.

I will start will “ram” VM.

In RedHat/Fedora we can use “system-config-network” for this purpose.

Install it using the below command. You should have root privilege or sudo privilege for this.Screen Shot 2015-03-15 at 9.18.47 pmOnce installed, run “system-config-network” command to start assigning the static IP.

Screen Shot 2015-03-15 at 9.19.24 pmThat will take you to something like this:

Screen Shot 2015-03-15 at 9.19.34 pm

Highlight “Device Configuration” from it using arrow keys and press “Enter/Return” key.

Screen Shot 2015-03-15 at 9.19.53 pmWe need to edit “vboxnet0”, so highlight it. If you don’t see that, you may highlight “” and press Enter.

Make sure your settings match the below ones. You may choose any IP from the range we saw earlier. I go for 192.168.56.[101-103]. Need not be adjacent ones.

Use tab and arrow keys to highlight the “OK” button and press Enter after the changes.

Screen Shot 2015-03-15 at 9.20.03 pmClick “Save”.

Screen Shot 2015-03-15 at 9.20.26 pm

Then “Save&Quit”

Screen Shot 2015-03-15 at 9.20.37 pm

With this, we have assigned static-IP 192.168.56.101 to VM: ram.

Now lets do a small trick to ease our path ahead; a small DNS resolution.

Lets use the names ram, daisy and rincy instead of the IPs.

For that, open the /etc/hosts file.

Screen Shot 2015-03-15 at 9.21.30 pmAnd add below lines to it.Screen Shot 2015-03-15 at 9.21.51 pm

Like wise, assign 192.168.56.102 to daisy and 192.168.56.103 to rincy and update the /etc/hosts file.

Now reboot all the VMs to be on the safer side. and try the below commands in all three VMs and host machine.

ping -c 3 ram
ping -c 3 daisy
ping -c 3 rincy

You will get the below output which means rincy, ram and daisy started talking to each other..

Screen Shot 2015-03-15 at 9.23.12 pmTry from the host machine and you will see Big-Daddy can talk to his children now..

Screen Shot 2015-03-15 at 9.24.52 pmSo there comes an end to this blog..

LDAP_CONTROL_RELAX undeclared while installing python-ldap

ERROR:

Modules/constants.c: In function ‘LDAPinit_constants’:
Modules/constants.c:158: error: ‘LDAP_OPT_DIAGNOSTIC_MESSAGE’ undeclared (first use in this function)
Modules/constants.c:158: error: (Each undeclared identifier is reported only once
Modules/constants.c:158: error: for each function it appears in.)
Modules/constants.c:380: error: ‘LDAP_CONTROL_RELAX’ undeclared (first use in this function)
error: command ‘gcc’ failed with exit status 1

 

Solution:
Install openldap24-libs & openldap24-libs-devel :
sudo yum install openldap24-libs-devel
sudo yum install openldap24-libs

Run the below commands and get the unique list of directories from the output:
Add those folders to setup.cfg file in the below section:
[_ldap]
library_dirs = /opt/openldap-RE24/lib /usr/lib
include_dirs = /opt/openldap-RE24/include /usr/include/sasl /usr/include

Now run the installation command:
python setup.py install

nginx: error while loading shared libraries: libpcre.so.1

If you get below error while starting nginx

    error:

nginx/sbin/nginx: error while loading shared libraries: libpcre.so.1: cannot open shared object file: No such file or directory

nginx couldn’t find the library by itself.
Specify the path of libpcre.so.1 in LD_LIBRARY_PATH and nginx will work fine

How to do specify the path?

export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:<absolute-path-of-libpcre.so.1>

apachectl status – How to solve lynx: command not found

apachectl status” will not work if you don’t have lynx ; text-based web browser.

You realize that when you get below message while using the command.

Error
bin/apachectl: line 95: lynx: command not found

Install the lynx and tell it to Apache httpd, he will surely understand.

Download the lynx from here. Change your working directory to the extracted folder and run the command:

./configure --prefix=<path-to-install-lynx>
make
make install

During lynx installation, it may stop with an error:

configure: error: No curses header-files found

Run the below command before proceeding:

sudo yum search ncurses-devel

Now it’s time to tell httpd about lynx.

In apachectl file (either in bin or conf directory), change the line starting with LYNX=”lynx -dump” to LYNX=”<lynx-installed-path>/lynx -dump”

apachectl status will start working..

Apache httpd: APR not found; error while installation

During Apache httpd installation if you get below error, that means Apache Portable Run-time environment was not found or not installed.

checking for APR... no
configure: error: APR not found.  Please read the documentation.

and/or

checking for APR-util... no
configure: error: APR-util not found. Please read the documentation.

So install APR and APR-util and give httpd those paths. Httpd will be happy to run for you after that… 🙂

Go further if you want to know how to install APR.

You can download APR and APR-util from here.

Then extract those to separate folders.

First change to the extract APR directory and install it. (Tip: cd command to change directory)

sudo ./configure --prefix=<apr-path>

sudo make

sudo make install

So you have a working APR. Next is APR-util.

Change to the extract APR-Util directory and install it. (Tip: cd command to change directory)

sudo ./configure --prefix=<apr-util-path> --with-prefix=<apr-path>

sudo make

sudo make instal

Install zlib packages with the command (optional; you can turn this off at your will):

yum install zlib zlib-devel

Apart from APR and APR-Util, you may need to install pcre too. So download it from here first.

Change to the directory and use the below commands to install.

sudo ./configure --prefix=<pcre-path>

sudo make

sudo make install

Now lets make httpd understand that we have a working pcre, APR and APR-util.

./configure --enable-file-cache --enable-cache --enable-disk-cache --enable-mem-cache --enable-deflate --enable-expires --enable-headers --enable-usertrack --enable-cgi --enable-vhost-alias --enable-rewrite --enable-so --prefix=<httpd-path> --with-apr=<apr-path> --with-apr-util=<apr-util-path> --with-pcre=<pcre-path>

# Rest is history make make install